GENERAL INFORMATION

The cell type selection is determined by the required discharge rates

  • cells of all types (KPL, KGL, KPM, KPH) provide the full delivery of the nominal capacity at 0,2 Cn discharge current during 5 hours to the cell voltage 1,0 V, if the discharge current is increasing, the output capacity will be decreasing;
  • the cells of KPL and KGL types are designed for the long discharge rate at the current to 0,5 Cn;
  • the cells of KPM types are designed for the medium discharge rates at the current to 1,0 Cn;
  • the cells of KPH types are designed for the high discharge rates at the current to 5,0 Cn, in the pulsed mode — at the current to15 Cn, , under the drop in voltage to 0,65 V on cell.

KGL cells and batteries

Non-maintenance alkaline nickel-cadmium cells of KGL type and blocks of them

The cells of KGL type are alkaline cells with gas recombination and comply with international standard IEC 62259. These cells don’t require periodic correction of electrolyte level when operated at long charge rate by low current or under specified stabilized charge voltage.

Applications
  • back-up power for cellular base stations, wire automatic telephone systems and other telecommunication objects;
  • signaling systems; emergency lighting and electrical power supply;
  • solar and wind power objects;
  • oil and gas complex (recovery, transportation and refining);
  • electric power objects (generation and distribution);
  • power system of navigation marks;
  • UPS;
  • underground;
  • passenger railway carriages;
  • electric locomotives and electric trains;
  • urban electric transport;
  • sea and river ships.

KPL cells and batteries

Alkaline nickel-cadmium cells of KPL type and blocks of them

Cells of KPL type are alkaline cells with pocket plate electrodes and comply with international standard IEC 60623.

Applications
  • back-up power for cellular base stations, wire automatic telephone systems and other telecommunication objects;
  • signaling systems; emergency lighting and electrical power supply;
  • solar and wind power objects;
  • oil and gas complex (recovery, transportation and refining);
  • electric power objects (generation and distribution);
  • power systems of navigation marks;
  • underground;
  • passenger railway carriages;
  • electric locomotives and electric trains;
  • urban electric transport;
  • sea and river ships.

KPM cells and batteries

Alkaline nickel-cadmium cells of KPM type and blocks of them

Cells of KPM type are alkaline cells with pocket plate electrodes and comply with international standard IEC 60623.

Applications
  • back-up power for cellular base stations, wire automatic telephone systems and other telecommunication objects;
  • signaling systems; emergency lighting and electrical power supply;
  • solar and wind power objects;
  • oil and gas complex (recovery, transportation and refining);
  • electric power objects (generation and distribution);
  • underground;
  • passenger railway carriages;
  • electric locomotives and electric trains;
  • urban electric transport;
  • sea and river ships.

KPH cells and batteries

Alkaline nickel-cadmium cells of KPH type and blocks of them

Cells of KPH type are alkaline cells with pocket plate electrodes and comply with international standard IEC 60623.

Applications
  • diesel engine starting of mainline and shunting locomotives;
  • internal combustion engine starting;
  • UPS with short discharge rate;
  • urban electric transport;
  • sea and river ships.